C Series Repair Tips




Search: C Series
Results 11
MakeModel Ch.SymptomProblem SolutionSolutionBy:
Tatung C Series
No remote control opMicroprocessor MN15151
DeccaC Series
Stuck on Chan 1 & no analogue control (Child Lock)Hold "Prog +" whilst switching on
DeccaC Series
st/by onlyHT (B+) present - on/off sw perm made - was faulty
DeccaC Series
St/by LED on - otherwise deadDry joint on end pin SCART skt depriving line feed to dr tfmr
DeccaC Series
No R/C operationNo o/p from r/c chip IC750 Replace TFMS4360N with TFMS5360
DeccaC Series
Line down pic when cold (folded scan)R413 18R ½w hi res - check HT correct -115v 14/20"; 109.5v 15/21"
DeccaC Series
int trip - once or twice a dayworse when heated - - TDA4605 heat sensitive - u/s
DeccaC Series
Field collapsedry joint I402
DeccaC Series
Cuts out on high brightness scenesHT volts drops in sympathy - CE803 220µ 16v ( supply to TDA4605)
DeccaC Series
childlock onsw on tv whilst holding in 'P+' button on front
Decca C Series
Volume won't Adj over full range or no front Panel Op.For volume - press --/- on remote , Vol + on set , --/- on remote for no front panel , Switch set off , Press & hold P+ on S